- CNC MACHINED 6061-T56 ALUMINUM BODY WITH A 42MM OR 35MM ID
- INCLUDES 1 RAZOR PIN MACHINED WITH A 0.012″ THROAT FOR MINIMUM TARGET OBSTRUCTION
- EIGHT RAZOR PIN LOCATIONS
- EIGHT 8-32 THREADED HOLES FOR OPTIONAL INTEGRATED PIN KIT OR TAK KIT
- 7/16”-20 THREADED HOLE FOR OPTIONAL RHEOSTAT LIGHT
- TEXTURED INTERIOR CUTS DOWN ON GLARE
- COMES WITH THREE COLORED LEVELS (RED, GREEN, AND BLUE)
- INCLUDES THREE STICKS OF FIBER (ORANGE, GREEN, AND BLUE)
- FEATURES A CHANNEL FOR RETAINING OPTIONAL FIBER OPTIC TUBING
- EIGHT LOCATIONS FOR AN OPTIONAL LIGHT ADDITION
- A VARIETY OF OPTIONAL SUNSHADES CAN BE THREADED INTO THE FRONT AND REAR OF THE SCOPE
- MDR (METAL DECAL RING)
- SINGLE WHITE RING WITH NO SHADE
- HELPS WITH SCOPE AND PEEP ALIGNMENT
- OPTIONAL COLORED DECALS ARE AVAILABLE
- 1-STEP SUNSHADE
- OFFERS A SINGLE CENTERING RING
- DOES NOT REDUCE THE INSIDE DIAMETER
- 2-STEP SUNSHADE
- OFFERS TWO CENTERING RINGS
- IDEAL FOR VARYING LIGHT CONDITIONS THAT AFFECTS PERCEIVED PEEP SIZE
- REDUCES THE INSIDE DIAMETER OF A 42MM SCOPE TO 35MM AND THE INSIDE DIAMETER OF A 35MM SCOPE TO 29MM
- LONG SUNSHADE FOR THE SCOPE BODY
- MAXIMUM SHADE WITHOUT A CENTERING RING
- LENS COMPATIBLE LONG SUNSHADE
- MAXIMUM SHADE TO REDUCE GLARE ON THE LENS
- CAN ONLY THREAD INTO A SHREWD LENS HOUSING
- ALLOWS FOR A LENS TO THREAD INTO THE SCOPE BODY
- 42mm SCOPE ALLOWS A LENS TO BE THREADED INTO EITHER SIDE
- 35mm SCOPE IS LIMITED TO JUST THE TARGET SIDE OF THE SCOPE
- BOTH SCOPE SIZES USE THE SAME SIZE LENS
- MADE IN THE USA
ALL SHREWD SCOPES ARE MACHINED WITH A RECESSED HEX POCKET TO ADAPT TO A STANDARD ROUND, HEX, OR SQUARE SCOPE MOUNTING ROD. THIS FEATURE IS DESIGNED SO THE SCOPE WILL NOT ROTATE ON THE MOUNTING BRACKET. WHEN MOUNTING THE SCOPE ONTO A SCOPE ROD THE INCLUDED HEX NUT ON THE OUTSIDE OF THE SCOPE SHOULD BE REMOVED BEFORE THE SCOPE ROD IS THREADED ONTO THE 10-32 THREADED ROD. IN SOME CASES THE LONGER 10-32 ROD SHOULD BE SUBSTITUTED FOR THE SHORTER, 1-1/4″ 10-32 BOLT INCLUDED IN THE PACKAGING.
- SQUARE POCKET MEASURES .314″ x .314″
COMPATIBILITY:
- B3 – REQUIRES THE USE OF THE 10-32 X 1/2″ BUTTON HEAD SCREW THAT COMES STOCK WITH THE B3 SIGHT WHEN MOUNTING THE SCOPE.
- AXCEL – CAN MOUNT TO THE STOCK AXCEL SCOPE ROD BUT WILL REQUIRE A 10-32 X 2.5″ BUTTON HEAD BOLT OR THE STOCK SCOPE ROD CAN BE REPLACED WITH A 1/2″ SHREWD SCOPE ROD.
- SPOT HOGG – REQUIRES A 3/8″ SHREWD SCOPE ROD.
- SURE-LOC – CAN MOUNT TO THE STOCK SCOPE ROD BUT MAY REQUIRE A 10-32 X 2.5″ BUTTON HEAD BOLT OR THE STOCK SCOPE ROD CAN BE REPLACED WITH A 3/8″ OR .455″ SCOPE ROD DEPENDING ON THE SIGHT MODEL (SEE SCOPE ROD PRODUCT DESCRIPTION).
