The Quarrow HP-35 Cap-Light is a sleek, multi-directional clip-light with an easy to activate push button switch. The HP-35 is light weight, only 1.0 ounce with batteries. To best suit your lighting needs, the HP-35 has 5 lighting modes that can be activated with the push of a button. Switch between 100% white light (35 lumens,) 50% white light (17.5 lumens,) 4 Green LEDs on, 4 Green LEDs in strobe mode or hold down the button for 4 seconds to activate all LEDs in an S.O.S. sequence.Green LEDs are best used for map reading or signaling, especially in low light conditions. Also perfect for hunting as some game cannot see green light. The head of the cap-light rotates 90° and turns 360° to give you lighting in any direction.The clip base attaches to anything and contains a powerful magnet to attach to most metal surfaces.
Green Light: Because the human eye recognizes the color green faster than other colors, green light is best used for map reading or signaling, especially in low light conditions. Also perfect for hunting as some game cannot see green light.
Features:
- 1 high powered LED outputs 35 lumens (bulbs rated for 110,000+ hours of life)
- 4 powerful Green LEDs output 4 lumens
- Head tilts 90° and turns 360° to provide light in all directions
- Five lighting modes – 100% white light (35 lumens,) 50% white light (17.5 lumens,) 4 Green LEDs on, 4 Green LEDs in strobe mode or all LEDs in an S.O.S. sequence
- Clip claws clip to caps, visors, seat belts, backpacks, shirts… well virtually anything.
- Powerful Magnetic Base
- Viewing Distance – 35 Meters
- Run Time – 20 Hours
- Water-Proof / Shock-Proof
- Glow-in-the-Dark Power Button
- Powered by two CR2032 batteries (included)
Specifications:
- Output: 35 lumens (White LED)
- 4 lumens (Green LEDs)
- Height: 1.75
- Length: 2.25”
- Width: 2.125”
- Weight: 0.125 lbs.
- Batteries: Two CR2032 batteries (Included)
Package Content
- 1 x NEBO Quarrow 35 Lumen Cap-Light
- 2 x CR2032 batteries
Gallery:
PayPal Pay Later Messaging Step 1: Choose message placementClick the button below and then hover over your page to select a placement. Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into theProduct Page field and click the ‘Save’ button in the top right corner.
